Asphalt is a black, sticky and highly tacky liquid. It is a semi-solid type of petroleum. It is classed as a pitch and can be located in natural deposits or refined as a product. Road construction is the primary use for asphalt. It is mixed with a group of other particles and it creates concrete. Eighty-five percent of all asphalt produced is used for roads. The other use for asphalt is for waterproofing and sealing roofs.

Construction uses refined asphalt. It is used in roofing and paving. Refined asphalt is produced to specification for an end user. It is done by blending or refining. It is estimated that the world uses about 102 tons of asphalt per year. Airport runways, footpaths, and car parks are other uses for asphalt. The production of asphalt is typically produced by mixing coarse and fine products like gravel, sand and crushed rock with asphalt. The mixing materials act as a binding agent. Old tires melted down may also be added to asphalt to form a certain consistency needed for intended projects. About 10 percent of produced asphalt is used for roofing where it is essential that the roof is waterproofed. The waterproofing qualities are also used in insulating and sealing building materials, to coat pipes, paint and carpet tile backing.

In construction, a paver is what is used to lay the asphalt on roads, parking lots, bridges, and many other places. It will lay the asphalt flat and compact the asphalt before the roller finishes the job. Asphalt is put in the paver’s hopper by a dump truck or a material transfer unit. The auger receives the asphalt from the hopper which has been carried down by a conveyor. The auger’s job is to place the right amount of asphalt in front of the screed. The screed takes the asphalt and spreads it the width of the area needed and does the initial compaction. The paver gives a smooth uniformed surface for the screed. The height of the screed is controlled by the angle, vibration of the screed, the towing force, and the material head. Other controls are used to elevate the finished pavement. All these controls give the asphalt coming down the proper amount to be used for the job. https://en.wikipedia.org/wiki/Paver_(vehicle)

Asphalt paving Sarasota FL contractors use a mixture of crude oil with a mixture of sand and stone to produce a dark brown or black substance. The mixture is heated up to over 300 degrees Fahrenheit. Before the asphalt is used the site is prepared by leveling the surface and grading it smooth. Once the asphalt is laid the area will be compacted by the roller.

Laying asphalt is the most economical way to go for large parking lots and it is basically maintenance free. Asphalt paving is used for commercial projects like parking lots, shopping centers, government, and corporate buildings and schools. The contractors will be able to remove a layer of old asphalt to get out any inadequacies so the new asphalt can be applied for a new smooth surface.

A lot of people out there just don’t realize how much goes into the HVAC trade. They may just think that people know this stuff because they try hard at it, and that’s the case most of the time. However, you should still learn some easy to follow information so you can get the lowdown on all of this.

Before an HVAC expert comes to your home to do any repair work, walk around the home and check out the temps in every room. Know what part of the house is cold and which is hot. That will help your repairman figure out where the problem is, and how he can fix it easily and quickly.

When a contractor gives you a list of references, be sure to make use of it. Call the people on the list and ask about the quality of the work, how closely they came to their quote and whether or not the work was completed according to the promised timeline.

Do not be surprised if the HVAC contractor you choose does an evaluation on your home. Any good contractor will spend time looking at the system you currently have and what the needs are for your home. They will also take a look at your duct system and look for air leaks.

When your contractor comes to fix your unit or install a new one, he should walk around your home and investigate what’s going on with your current set-up. They should be looking for how much insulation you have, where your windows are and what quality they are and more.

Before you hire anyone to do any work on your HVAC, be sure to get a written estimate which has itemized costs listed on it. This will ensure that comparing one contractor to another will be simple as you can see what one offers that another doesn’t, or what price they’re charging for the same items.

Know what you need before you hire a contractor. You might not be able to get a price quote unless you let the contractor see your current system first. It can be harder if you don’t know what’s wrong. Know the right information ahead of time.

Do you hear a clicking sound when your fan is turning? This may mean that there is something in the way of the blades of the fan. If it gets so bad that the blade bends, you must replace it, just unbending it will leave the fan unbalanced and can cause further issues.

If you have oil ports as part of the fan condenser, annual lubrication is key. Most of these ports have some sort of protective cap covering them. Look for an oil that is lightweight and then put about 10 drops inside the port. You don’t want to put in too much.

HVAC won’t be too hard for you to understand now that you have some great tips in your mind about it. The key is to put this all to good use so that it can work out well for you in the long run. Hopefully you learned what you needed to know above!…

A properly serviced and running HVAC system is vital to ensure that you don’t have skyrocketing energy costs. A faulty HVAC system can cost any homeowner a lot of money in costly repairs, not too mention the time spent feeling uncomfortable if it is too cold or hot. Keep your HVAC system running right, and with the tips below it is a great start, so continue reading.

Make sure you check the filters in your air conditioning unit. This is important because checking your filters could make the difference between inexpensive repairs and more expensive ones down the line. Try to put it into your monthly schedule so that you don’t forget to check the filters regularly.

When a contractor gives you a list of references, be sure to make use of it. Call the people on the list and ask about the quality of the work, how closely they came to their quote and whether or not the work was completed according to the promised timeline.

If you have condenser units outside your home, be sure to clean out the debris from them often. You can never tell when things will pile up, especially following rain or wind storms. These can wreak havoc on your units. It could overheat and cause a disaster with your unit.

Do you hear a clicking sound when your fan is turning? This may mean that there is something in the way of the blades of the fan. If it gets so bad that the blade bends, you must replace it, just unbending it will leave the fan unbalanced and can cause further issues.

In order to avoid having any problems with your air conditioning unit, keep all vegetation at least two feet away from the outdoor unit. The unit should be clear of any vegetation on all sides and above. When you mow the lawn, aim the grass clippings away from the a/c unit. This will prevent grass getting inside the a/c and making it malfunction.

In order to cheaply cool your home, turn the temperature up. If you take a few showers a day or just drink a cold ice water, you’ll find that you’re saving a lot of money on your utility bills by keeping the thermostat a little higher than usual in your home.

If you currently have a manual thermostat, consider installing a programmable one. You can set your system for different temperatures depending on time of day and if anyone is home. Also, you can set upper and lower temperature settings to allow for a comfortable range of temperatures so that heating and cooling don’t kick in when not needed.

You do not want your living environment too hot or too cold, and having a good HVAC system that is running how it is supposed to is key. Thankfully, you just learned some helpful tips that showed you how to spot problems, along with how to properly maintain your HVAC system. Keep these tips in mind as you perform regular maintenance on your HVAC system.…

Considering that termites cost homeowners more than $5 billion in property damage each year, Springfield residents owe it to themselves to know them and take a proactive approach to protect their homes from the devastating damage the pests cause. Termites can cause considerable damage in a very short time span, resulting in thousands of dollars’ worth of damage that homeowners are left to pay. When you call a professional for residential termite control Springfield IL, worries are gone.

Signs of a Termite Infestation

Hollowed or damaged wood behind walls, underneath floors, and on the exterior of the home’s structure indicate the presence of termites. Termites chew through wood searching for cellulose to munch upon, which often leaves grooves behind. Don’t ignore this common sign that you have termites lurking around your property.

Look for discarded termite wings near doors, windows, and other entry-access points. Termites actually purposely discard their wings since they no longer need them once they land. Swarms of termites may also gather around these same areas, especially if there is an air conditioning unit nearby.

Look for mud tubes where the ground meets the house or other wood sources. Subterranean termites create mud tunnels to travel underground and transport and hide their food source. The tunnels help create a suitable environment for the termite since it depends on certain environments to thrive.

These signs are the most common indicators that termites are in or near your home. Other signs may also indicate termites, so keep an eye out for anything unusual at your home. Many times termite infestations occur without any noticeable signs. It’s better to schedule an annual inspection from a professional termite control company to make sure your home is safe and free from this pest than to simply hope for the best. Termites can destroy a home from the inside out if you don’t take the proper steps to protect the property.

Is Your Home At-Risk?

Don’t wrongly assume that your home is not at risk for a termite infestation. So many homeowners make the mistake and pay for it when all is said and done. Every home is at-risk for termite infestation, including brick houses. Don’t assume that your home is safe simply because you don’t notice any signs of an infestation. And, take the proper steps to ensure that your home is free from termites. Some of the steps that you can take to keep your home free from termites include:

– Do not allow moisture to accumulate near the surface of the home
– Remove all wood from the property, including cardboard and tree stumps
– Don’t use mulch on your lawn or in the garden. If you must use mulch, use it sparingly.
– Reduce crawlspace moisture and humidity

Termites are a big problem in the state and across the U.S., but that doesn’t mean they must rain on your parade. Keep a close eye on your home, schedule those annual inspections,and keep your home pest-free!

Did you know that faulty air chambers might be why you are hearing a hammering sound in your pipes? The noise is known as water hammer and it may mean that water has entered your air chamber. Here are some tips to help you fix your problem.

If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.

Be careful about using liquid clog cleaners. These liquids can contain chemicals that are extremely bad for your pipes. Instead, use a snake or a plunger to dislodge any clogs you might encounter. Be sure to try these things before giving up and calling a plumber, who will probably re-perform those same acts.

In order to avoid unsightly and unnecessary clogs in your shower, invest in a drain strainer. This cost-effective addition to your shower will gather your hair before it makes it to the drain, and limit the chances that you will find yourself showering while standing in a clogged up mess.

You need to winter-proof your house. You have to make sure you switch of the master circuit breaker or the shut-off valve before you leave your house. Since one small hole or congested water can quickly freeze and cause pipes to break and expand, you need to drain and open all outdoor and household water lines.

Frozen and bursting pipes from harsh winter weather is a problem that no-one wants, so plan now to winterize your exterior faucets and pipes against freezing conditions. A simple way to accomplish this is to find the exterior water shut-off valve located inside your home (often located in the basement). Turn off the water valve to stop water flow, and then open up the outside faucets to drain out any water that has collected. Be sure to turn off the outside water faucets tightly after the water has drained out. Take in any hoses you may have outside so they don’t crack from the cold weather.

If a plunger is ineffective, you might be able to do the trick with a bucket of warm water. Do this every time the water level gets too low.

There are many ways to unclog a drain. You can try plunging it at first. If that doesn’t work try using a chemical agent from the store. Before you go and spend money at the store though, if you have baking soda and some vinegar handy, you can mix those together and pour them in the drain and try to plunge that but if all else fails they have stronger remedies at your local hardware store.

You know what can cause that hammering noise, plus a lot more plumbing information. You just saved yourself a lot of money if any of those issues became unbearable or resulted in broken parts. Take time to read back over this article periodically to make sure that you are on top of your plumbing skills.…

Some of the best-tasting food you’ll ever eat can be grown in your own back yard. Think of the variety! A ripe, juicy watermelon or a fresh, crisp carrot, can add to your meal. Not to mention the money you can save growing your own, verses the grocery store. In addition, you can grow you produce naturally, without enhancers. Following are some tips to help you become an organic gardener:

When choosing plants, pick those that produce a high yield. There are genetically modified plants that resist cold and/or disease. These often give higher yields due to higher survival rates.

Plant crops compatible with each other in order to add even more efficiency to your garden. Plant crops that take longer to mature next to faster growing varieties. You can also get ahead of the season by planting cooler climate crops in the shade of larger summer crops. Greens such as lettuce do great in the shade of a large tomato plant.

Organize your garden so that all your plants are exposed to the sun most of the time. Your house or your trees cast shadows: keep in mind that these shadows move throughout the day. You ideally want your plants to be exposed to the sun in the morning and the afternoon, but not around noon, especially in the summer time.

When and why should shrubs be pruned? Most shrubs need pruning to increase flowering. Deciduous spring and early flowering shrubs should be pruned immediately after flowering. Cut back old wood to encourage new growth. The buds for next year’s flowers will appear on this new wood. Late summer flowering shrubs should be pruned in spring. They will produce flowers on the shoots that grow immediately after pruning. Winter flowering shrubs simply need pruning in early spring to clean up any dead or diseased branches.

For showy flowers throughout the spring and summer, plant plenty of bulbs. Not only are bulbs hearty and easy to grow, but they’ll continue to grow as time goes on. Different bulbs bloom at various times, so choosing appropriately, you may have blooms early spring to later summer.

Before starting a garden, it is important that you have a plan. Without one, your garden may not come out the way you want it to. Some things to plan out include where to put the garden in your yard, what you want to grow, and whether to start from seed or plants.

Vegetable water makes a wonderful fertilizer. Next time you boil or steam your vegetables to eat, set aside the cooking water. This water is chock full of nutrients, and will provide a nice, nutritious boost to your garden. Make sure the water is thoroughly cooled first hot water can damage and even kill plant roots.

Follow the above suggestions to help you with your organic garden. Think of the benefits you get by gardening the natural way. Maybe the nutrition is your primary concern, or perhaps you are looking for a way to cut cost. Whatever the reason, enjoy taking a bit out of that ripe, juicy watermelon or a fresh, crisp carrot!…

If your roof has been damaged by hail or high winds, or if it is starting to leak, you need to find an experienced roofing company to make the needed repairs. How can you know which contractor to trust? How much should you expect to pay? To answer these and other questions, keep reading.

Always make safety your first priority when it comes to fixing your roof. The weather is key to whether or not you should be up on a roof. Put a bucket beneath the leak until it stops raining, and work on the problem after the roof has dried out.

One of the biggest foes of your roof is ice. When gutters back up and freeze up, they can push the shingles and even wood up off the top of your house. Once that ice begins to melt, it will leak inside and rot out your home. Watch for ice build up and fix the problem quickly.

When there is a crack in a shingle, you must replace it. In fact, any cracking usually means that you’ll have to replace all of the shingles as they’re likely to start cracking too. Whether it be from inferior materials or improperly installed shingles, you’ll save yourself many problems by getting it all replaced.

As you prepare to get your roof replaced, remember that there are a lot of nails up there. That means that as shingles come off, nails are going to become loose and fall to the ground. Most contractors will place a tarp down to catch as many loose nails as possible. If your contractor does not do this, question them about how the nails will be found and removed from your property.

Since replacing your roof can be one of the most expensive projects besides the cost of the home itself, make sure you know who you’re hiring. Avoid the temptation to hire a friend of a friend, or inexpensive “handymen.” Look for a licensed contractor who guarantees his work and comes with many good reviews and recommendations.

It is important that you ensure the roofing contractor you are considering provides high-quality work. You may want to ask your friends or family for suggestions if any of them have had their roofs done. It is important mainly because you won’t want to have your repairs be done poorly, as they will only cost you more in the future.

Measure twice, cut once. If you will be doing your own roofing job, you want to make sure your measurements are correct. This will save you both time and money. You can assure your measurements are accurate by taking the extra time it takes to measure two, or even three times.

Repairing or replacing your roof is not something that you can easily delay or just do by yourself. You need professional help to have it done right. This is why it is important to educate yourself about roofing before it is too late. Remember the information you have read here the next time you need work done on your roof.…