Plumbing Is Not As Hard As It Seems
February 15, 2018
If you are a first time homeowner or maybe someone who has just moved out of Mom and Dad’s humble abode, you may not know a lick about plumbing, but there are certain things that you should know. This article will discuss some of them, and you will be more knowledgeable after reading the tips below.
Do not pour grease or oil down any of your household drains. Put them in containers and place in the fridge until they are solid, then throw them away. If you pour them down the drain, they can solidify in cold pipes. These solid masses will clog your pipes and are very difficult to remove.
If your sewer is backed up, there are things you can do to troubleshoot and clean, including renting equipment like a main line cable. However, often times this does not fully take care of the problem. A professional needs to assess the issue then, using a camera method, and thoroughly cleaning the main line.
Is your toilet leaking? Find out by putting some food color in the tank and then check the bowl later. If there is colored water in the bowl, the toilet has an internal leak. To fix an internal leak you can simply replace the tank’s ball or flapper.
Most people run water in their sink when using their garbage disposal. While many people think that running water in conjunction with the disposal will cause it to work more efficiently, it simply isn’t true. In contrast, it could actually cause garbage or waste to stick to the insides of the disposal and do more damage than good.
Garbage disposals are a common cause of plumbing problems, which is an easy problem to solve. Don’t just put everything down the disposal or treat it like a second trash can. Use the disposal things that would be difficult to dispose of normally. Putting all leftover food down the sink is a good way to produce clogs.
In any DIY plumbing project, make sure that you always test the drains and the supply lines before you close up the walls. It is a lot easier to find and solve problems if you look for them while you are still in the process of actively doing the job.
When plunging a drain to attempt to remove a blockage, first make sure that the drain is completely covered in water. This helps to form a seal. Then, plunge at least fifteen to twenty times before stopping. Repeat the process two to three times. If this doesn’t work, try a chemical drain cleaner.
If you need to shut off your plumbing system, turning off the main valve is not enough. A leaking sink will still be supplied by the water that remains in the pipes. Make sure you check all the pipes for signs of wetness or leaks. You should do this regularly.
Now that you have read these plumbing tips, you should feel a little more comfortable about looking after that scary hardware that lurks in some rooms of your home. Follow the advice above and you are sure to do the right things when tinkering around with any of the pipes.