June 28, 2019
Plumbing is a lot more that just fixing a leak under the sink. It is truly a huge system that needs to be maintained. It has so many techniques and equipment that require research and hard work. Do you have what it takes? Regardless of your answer, here are some tips to help you.
If your pipes bang when you turn on the water, and all the pipes are anchored correctly, you should add some straps or cushion the pipes with a rubber blanket. There may be times when you will need to do both. Make sure that if you have copper pipes, you are not using galvanized straps.
On very cold winter nights, allow your faucets to trickle slightly, especially if your pipes are located in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. You can catch the water and use it for other household needs to prevent wasting it.
When starting a plumbing project that is due to loud noises in your pipes empty the pipes first. This can be an easy fix to an other wise wasted huge job. Just close the main water line and open the facets throughout the house. After the water has stopped flowing turn the water on from the main source and check to see if the noise is eliminated.
Avoid bleach tablets, blue toilet deodorizers or the other odor removers inside your toilet. Both of these may help to eliminate odors from your toilet, but it can also damage the rubber parts of your toilet, causing it to not function probably, or even to break down completely.
There are many ways to unclog a drain. You can try plunging it at first. If that doesn’t work try using a chemical agent from the store. Before you go and spend money at the store though, if you have baking soda and some vinegar handy, you can mix those together and pour them in the drain and try to plunge that but if all else fails they have stronger remedies at your local hardware store.
Check to make sure that overflow holes are not clogged up. If your sink starts to overflow, the water will run into the overflow holes, this might not be a huge issue, unless they are clogged. Make cleaning debris from the overflow holes part of your regular routine of maintaining your plumbing and checking it for problems and required repairs.
If water is not coming to the dishwasher, you most likely have a blockage somewhere. You will need to turn off the water supply and remove the hose that leads to the dishwasher. After securing the hose, turn the water back on. See if it feeds into a bowl. If not, then you must find the block where it is at which may include removing more piping.
Now you see that plumbing is a lot more than haphazardly fixing a tiny leak. It takes skill and work. You don’t want to create more problems, so why not take some time to learn how to do it right? The above tips should have given you some pointers on how to do that.…