Did you know that faulty air chambers might be why you are hearing a hammering sound in your pipes? The noise is known as water hammer and it may mean that water has entered your air chamber. Here are some tips to help you fix your problem.
If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.
Be careful about using liquid clog cleaners. These liquids can contain chemicals that are extremely bad for your pipes. Instead, use a snake or a plunger to dislodge any clogs you might encounter. Be sure to try these things before giving up and calling a plumber, who will probably re-perform those same acts.
In order to avoid unsightly and unnecessary clogs in your shower, invest in a drain strainer. This cost-effective addition to your shower will gather your hair before it makes it to the drain, and limit the chances that you will find yourself showering while standing in a clogged up mess.
You need to winter-proof your house. You have to make sure you switch of the master circuit breaker or the shut-off valve before you leave your house. Since one small hole or congested water can quickly freeze and cause pipes to break and expand, you need to drain and open all outdoor and household water lines.
Frozen and bursting pipes from harsh winter weather is a problem that no-one wants, so plan now to winterize your exterior faucets and pipes against freezing conditions. A simple way to accomplish this is to find the exterior water shut-off valve located inside your home (often located in the basement). Turn off the water valve to stop water flow, and then open up the outside faucets to drain out any water that has collected. Be sure to turn off the outside water faucets tightly after the water has drained out. Take in any hoses you may have outside so they don’t crack from the cold weather.
If a plunger is ineffective, you might be able to do the trick with a bucket of warm water. Do this every time the water level gets too low.
There are many ways to unclog a drain. You can try plunging it at first. If that doesn’t work try using a chemical agent from the store. Before you go and spend money at the store though, if you have baking soda and some vinegar handy, you can mix those together and pour them in the drain and try to plunge that but if all else fails they have stronger remedies at your local hardware store.
You know what can cause that hammering noise, plus a lot more plumbing information. You just saved yourself a lot of money if any of those issues became unbearable or resulted in broken parts. Take time to read back over this article periodically to make sure that you are on top of your plumbing skills.…